Fact Checked

What Are the Best Tips for Making a DIY Bed Liner?

Troy Holmes
Troy Holmes

A do-it-yourself (DIY) truck bed liner is a self-installed bed liner that protects the bed body of a truck. Installing a DIY bed liner saves money, but requires some work. The best tip for making this type of liner is to ensure the truck bed is thoroughly sanded and cleaned before painting. This will help the spray-on material stick to the truck bed.

It is important to have a sturdy, clean work area before starting a DIY bed liner project. This work station should have enough space to hold paint cans, brushes, cleaners, and safety material. The area should be a clean space that can be used for cleaning spray cans, brushes, and mixing epoxy paint.

Woman posing
Woman posing

A bed liner is typically made with special epoxy paint that can burn the eyes and skin. It is important to wear the appropriate safety gear and proper clothing when installing this product onto a truck bed. This includes safety glasses, gloves, and clothes that protect the skin from spraying material.

Installing a DIY bed liner is similar to spray painting a vehicle. This starts by cleaning and sanding the truck bed with a heavy-graded sand paper. It is also important to ensure that any rust has been sanded and treated with rust treatment before applying the bed liner epoxy. The keeps the metal under the bed liner clean and rust free.

A DIY bed liner should only be installed with quality bed liner epoxy paint. Regular paint wears off and does not provide the same protection as epoxy bed liner paint. This is special type of paint that deflects rain and moisture from the floor bed. It also leaves a rough residue that gives the bed liner more traction for shoes and objects.

There are a few ways to paint a DIY bed liner. Installers may use a spray gun, paint roller, or heavy-duty brush. A brush and roller are less expensive but using them will take more time. A spray gun is the fastest way to install the liner, but requires some additional tools and safety gear.

It is important to have a good spray gun and air compressor when spraying a bed liner. These tools are available at most automotive stores and make the installation process easier. An undercoating spray gun uses special nozzles that deliver heavier deposits of epoxy material.

Tool cleanup is an important part of any painting project. It is critical that the tools and workspace are cleaned with mineral spirits after the painting is complete. This epoxy material will harden and destroy tools if they are not cleaned promptly after the job is finished.

You might also Like

Discussion Comments


Good tips on installations. I would pay extra attention to making sure you have the proper gear when installing because not only is it potentially dangerous when working with DIY paint, but it's very hard to get off the skin.

Post your comments
Forgot password?
    • Woman posing
      Woman posing