Industry
Fact-checked

At AboutMechanics, we're committed to delivering accurate, trustworthy information. Our expert-authored content is rigorously fact-checked and sourced from credible authorities. Discover how we uphold the highest standards in providing you with reliable knowledge.

Learn more...

What is Rigid Pavement?

M. McGee
M. McGee

Rigid pavement is the technical term for any road surface made of concrete. Concrete roads are called rigid while asphalt-covered roads are flexible. These terms refer to the amount of deformation created in the road surface itself when in use and over time. The largest advantages to using concrete pavement are in its durability and ability to hold a shape. There are three basic types of rigid pavement commonly used worldwide.

The basic design of rigid pavement is very simple. A surface layer, made up of slabs of Portland cement concrete (PCC), sits on top of a handful of sub-layers. The layer directly under the PCC is more flexible than the concrete, but still quite rigid. This layer provides a stable base for the PCC as well as assists in drainage. Some roads have a second sublayer under the first that is even more flexible, while some simply have the existing soil. The biggest factor in deciding whether this second layer is necessary is the composition of the existing material.

Rigid pavement may crack under stress.
Rigid pavement may crack under stress.

Flexible and rigid pavement are the two basic styles of road surfaces. Flexible pavement is almost always asphalt while rigid pavement is concrete. The difference between these two styles mostly comes down to deformation. Flexible pavement allows for significant deformation under heavy loads; this means the road will bend when placed under stress. Rigid pavement will remain fixed when placed under stress and will crack when the stress exceeds its tolerances.

Driveways and other low-traffic roads may be paved using traditional concrete since they are less likely to endure extreme stress.
Driveways and other low-traffic roads may be paved using traditional concrete since they are less likely to endure extreme stress.

The way concrete pavement deals with cracking is the main difference between the three styles of pavement. The most common style, joined plain concrete (JPC), is made up of slabs with no steel reinforcement. When cracks develop, they should occur in the cracks between slabs, making the road surface easy to repair.

Joined reinforced concrete contains a steel mesh that reinforces the structure of the concrete slab. The concrete slabs used in this style are often much larger than those used in JPC designs. The reinforcement prevents some cracks, allowing the larger slabs to be effective. The cracks, when they appear, still typically occur between slabs.

Rigid pavement is the technical term for any road surface made of concrete.
Rigid pavement is the technical term for any road surface made of concrete.

The third style, continuously reinforced concrete, contains a high quantity of steel reinforcement. These slabs are not designed to crack at connection points—the slab itself cracks. The steel reinforcement holds cracks together so closely that they do not cause structural problems within the slab.

There are two main reasons to use rigid pavement, both of which stem from its hardness. Since the surface is harder, it is also more durable over time. This keeps the road in good working order far longer than softer surfaces. The other advantage of concrete roads is in their shaping. Since the surface can withstand a lot of weight without deformation, it is possible to create groves and channels in the road to provide extra traction and move water off the road’s surface.

Discussion Comments

Logicfest

Isn't it considerably less expensive to pave roads with asphalt than concrete? If that is the case, then does the durability of concrete offset that cost in the long run? I'm curious about this as highways in my state get worn our in a hurry due to 18 wheelers traveling over them, thus meaning road repair and replacement is very frequent.

Would we be better off than using concrete in the long term?

Post your comments
Login:
Forgot password?
Register:
    • Rigid pavement may crack under stress.
      Rigid pavement may crack under stress.
    • Driveways and other low-traffic roads may be paved using traditional concrete since they are less likely to endure extreme stress.
      By: podsolnykh
      Driveways and other low-traffic roads may be paved using traditional concrete since they are less likely to endure extreme stress.
    • Rigid pavement is the technical term for any road surface made of concrete.
      By: alisonhancock
      Rigid pavement is the technical term for any road surface made of concrete.