Industry
Fact-checked

At AboutMechanics, we're committed to delivering accurate, trustworthy information. Our expert-authored content is rigorously fact-checked and sourced from credible authorities. Discover how we uphold the highest standards in providing you with reliable knowledge.

Learn more...

What Is an Electromagnetic Pump?

Jordan Weagly
Jordan Weagly

An electromagnetic pump is most often a device that uses electromagnetism to create flow in magnetically charged materials such as liquid metal. These kinds of pumps can be useful for many materials, including non-metal elements such as potassium. One important function of these pumps is to cool nuclear reactors, though some other applications can be considered common. Magnetic fields used to create flow have some significant benefits over mechanical pumps. Different types of pumps might be used in specific situations because of the benefits they offer.

In general, magnetic fields are created inside an electromagnetic pump using permanent magnets or electromagnets. To achieve the required flow, high electrical currents or temperatures must be established. The magnets can be configured to create a specific directional flow, depending on the application. Materials that are often considered difficult to handle, such as liquid metal, will usually flow in a predictable and continuous direction inside an electromagnetic pump.

Man with a drill
Man with a drill

Common materials passed through an electromagnetic pump include metals such as aluminum and mercury. Other magnetically charged elements passed through an electromagnetic pump can include zinc, sodium and potassium. Different elements usually require different pump configurations and temperatures. They also are used for specific applications.

Electromagnetic pumps are often used to cool nuclear reactors. Extreme temperatures in nuclear environments often require high-tolerance cooling mechanisms, and an electromagnetic pump is considered best in such situations. Magnetic fields also can be used in foundry work, where high-temperature metals must be poured or otherwise transported from one location to another. In this regard, an electromagnetic pump also can work as a flow meter when mechanical devices might be insufficient.

Despite the specific requirements that can create flow in these materials, there are common advantages that electromagnetic pumps have over mechanical pumps. There are often no moving parts required to create material flow, so there is little resistance and less stress on the machinery. This unrestricted flow can be considered more reliable than many other methods and has been shown to last in high-stress situations for extended periods.

Variations of the electromagnetic pump process can include direct current conduction, alternating current (AC) conduction and linear induction. Direct current conduction pumps are often used for high-temperature situations and require high amounts of power. Alternating current conduction pumps depend on AC power and produce flow using transformer configurations. Linear induction pumps also use AC power passed through specific magnetic windings to create a traveling magnetic field that creates flow.

Discussion Comments

hamje32

@miriam98 - I think liquid metal is used in the reactors as part of the cooling mechanism. This is where the pumps would come in.

miriam98

@MrMoody - How does the electromagnetic pump benefit the nuclear reactor exactly? I know that it’s used to cool it, but what does that have to do with magnetism? Is there any oozing metal that needs to be pumped in the process?

MrMoody

@David09 - If you needed more power you’d probably use the AC conduction rather than trying to wrap more wires around the magnet, I think.

These are supposed to be high powered pumps. You’d need maximum voltage to generate the magnetism needed for those kinds of situations.

David09

It’s a smart idea. Frankly I can’t think of a better way to move liquid metal. Metal in this form is likely to move very slowly, just oozing along, and so a traditional electromechanical pump would work hard to get the job done. An electromagnetic pump makes more sense.

The only thing is depending on the weight of the liquid metal you would probably need very strong electromagnets to pump it along. However, I think this should not be a problem.

You can easily adjust the magnetism by adding extra layers of wiring or stuff like that; whatever they do to make the magnets stronger.

Post your comments
Login:
Forgot password?
Register:
    • Man with a drill
      Man with a drill