At AboutMechanics, we're committed to delivering accurate, trustworthy information. Our expert-authored content is rigorously fact-checked and sourced from credible authorities. Discover how we uphold the highest standards in providing you with reliable knowledge.
What Is a Flow Line?
Malcolm Tatum
Malcolm Tatum
Flow lines are pipe lines that are constructed to direct the flow of some type of liquid or gas from a source to either equipment used to process the substance or to some type of storage facility. It is not unusual for a flow line to be equipped with electronic monitoring devices and other features that make it possible to control the rate of that flow during the transfer. Depending on the exact function of the pipe flow line, various safety regulations may apply to the construction and ongoing operation of the system.
A common example of a flow line is used in the collection and processing of oil. While system designs for the line may vary somewhat, a basic line on a drilling rig will require the use of piping that has a larger diameter. At one end, the pipe is connected to what is known as a bell nipple just under the drill floor. It is at this point that the oil enters the pipeline. At the opposite end, the line is connected to what is known as a possum belly. The belly, which is simply a wider section that serves as a return line, then routes the product to tanks that filter impurities from the oil and store the collected product.
A similar process is used with a water flow line. Many municipal water systems utilize the line to route water that is extracted from sewage systems and route the contaminated water to purification facilities. Some systems utilize a series of filters that help to remove some of the larger contaminants for processing in a different area of the plant. The pipe flow line moves the water through the plant, where it emerges and can be returned to the municipal water system or allowed to flow into a body of water such as a stream, river, or lake. Since the water has been decontaminated, it poses no threat to any marine life in the body of water.
The construction of a flow line normally involves the need to comply with any governmental safety and structural regulations that are in force in the area where the line is located. Doing so helps to ensure that the potential for the system to fail and the opportunity for contamination or danger to lives and the surrounding environment is kept to a minimum. Periodic inspections of each section of the line help to make sure the system remains in compliance with those rules and regulations.
Malcolm Tatum
After many years in the teleconferencing industry, Michael decided to embrace his passion for trivia, research, and writing by becoming a full-time freelance writer. Since then, he has contributed articles to a variety of print and online publications, including AboutMechanics, and his work has also appeared in poetry collections, devotional anthologies, and several newspapers. Malcolm’s other interests include collecting vinyl records, minor league baseball, and cycling.
Learn more...
Malcolm Tatum
After many years in the teleconferencing industry, Michael decided to embrace his passion for trivia, research, and writing by becoming a full-time freelance writer. Since then, he has contributed articles to a variety of print and online publications, including AboutMechanics, and his work has also appeared in poetry collections, devotional anthologies, and several newspapers. Malcolm’s other interests include collecting vinyl records, minor league baseball, and cycling.
Learn more...AS FEATURED ON:
AS FEATURED ON:
-
![Depending on the exact function of the pipe flow line, various safety regulations may apply to the construction and ongoing operation of the system.]()
By: evp82Depending on the exact function of the pipe flow line, various safety regulations may apply to the construction and ongoing operation of the system.
Discussion Comments
How are flowlines stored in the supply base before the movement offshore?
@Charred - A flow line in a drilling rig is a great tool, until it ruptures. Some of the worst oil rig disasters have had broken flow lines that have seeped millions of gallons of oil into the ocean, contaminating wildlife for miles on end.
I remember watching one such disaster a couple of years ago, and every day the news would come on telling you how much oil was leaking into the ocean.
Onscreen you would see the actual flow meter which measures how much and how rapidly oil was leaking. I’m all in favor of drilling for oil but there is no excuse for these kinds of disasters.
Isn’t it wonderful to realize that polluted water is directed from a sewer and into a lake after filtration? Actually the thought seems kind of grotesque when you think about it but it’s a testament to the effectiveness (I hope) of modern filtration systems that this process takes place.
I think we should be using flow lines to large basins to collect, purify and redirect rain water. Some people say that rain water is polluted and that you shouldn’t drink it, but it can be treated just like anything else I’m sure. Even the industrial pollutants can be removed in my opinion.
Post your comments