Cars
Fact-checked

At WikiMotors, we're committed to delivering accurate, trustworthy information. Our expert-authored content is rigorously fact-checked and sourced from credible authorities. Discover how we uphold the highest standards in providing you with reliable knowledge.

Learn more...

What Is a Cone Clutch?

Lori Kilchermann
Lori Kilchermann

A cone clutch is a type of clutch that utilizes a conical friction surface which meshes into a conical flywheel, wedging itself into a locked position. The act of the cone clutch wedging into the cone-shaped flywheel produces a much stronger lock up than that of a flat clutch and a flat flywheel. Used in early automobiles, this type of clutch is now found mainly in high-performance racing applications as well as off-shore racing boats.

One of the benefits of this type clutch is that the clutch pedal does not need to be depressed completely in order to shift the transmission. Unlike a typical flat clutch system that requires complete pedal depression in order to release the clutch from the flywheel, the cone clutch requires only partial depression to break the friction bond of the clutch and allow easy shifting. In racing applications this often means an advantage in coming up to speed. In off-shore racing boats, this can mean faster acceleration from plane.

Woman with hand on her hip
Woman with hand on her hip

A clutch provides grip through friction, and wear is a by-product of this friction. As the clutch material is allowed to slip against the flywheel, the clutch material is worn away. In a cone clutch application, less material is worn away due to the nature of the cone pulling into its cone-shaped flywheel. The need to depress the clutch pedal minimally in order to shift means less slippage between gear selections, which results in less wear.

One factor making the cone clutch system popular in racing applications is its ease of reconditioning. A cone clutch can be rebuilt and reused many times instead of replacing the clutch with a new unit. The materials used in the typical flat clutch are far more lightweight than those used in a cone system. Where the clutch disk in a flat system is made of very thin and lightweight steel, the cone unit is made of heavy, solid steel machined into the correct tolerances.

The very strength of this type clutch unit eliminates the need for a flywheel. By packaging the entire clutch unit into a smaller rotating mass, the vehicle is able to accelerate much more quickly and the engine is able to reach its peak operating power level much faster than a flat clutch system model. In a racing application, this means that the vehicle can accelerate faster out of a corner and reach its top power-producing abilities much quicker than non-cone clutched competitors.

Discussion Comments

burcidi

@feruze-- A cone clutch is also used for tractors, not just race cars and boats.

I think what you mentioned might be specific to boats because I've had my tractor's cone clutch fixed at a mechanic several times. I'm guessing the system on boats is different and more sensitive. But someone who's good with cars could probably look at and fix a cone clutch system themselves. I don't think it's that hard.

A cone clutch does require relining from time to time. So that might be one difference from other kinds of clutches. But there is no guarantee that the same isn't going to be necessary for a mechanic, centrifugal, or a magnetic clutch either.

bear78

Yea, cone clutch accelerates really well and is great for racing and boating. But it's also really hard and expensive to do maintenance on it.

My boat had an issue with the cone clutch last year. It had a difficulty going into gears. I had to get an engineer to fix it because the system is so sensitive and a mechanic can't do it. I paid a lot of money for it.

I'm not sure how it would be different with a different type of clutch system but I think it would be easier. At least it wouldn't require an engineer.

fify

As someone who's used a regular stick shift car with a mechanical clutch, I understand exactly what the article means when talking about the difficulties of a flat clutch.

When I first started learning how to drive a stick shift, I often made the mistake of not pressing the clutch pedal all the way which would cause the car to stop. Or I would forget to do it properly while driving and the clutch couldn't shift making a horrible sound.

If the cone clutch system existed in stick shift cars, driving would be so much easier. The car wouldn't stop in the middle of traffic, or slide back while trying to change gears. I wouldn't have so much trouble making turns either, just as the article said.

I can definitely see the advantages of the cone clutch system for racing, but I think it would also be great to replace the mechanical clutch system in stick shift cars.

Post your comments
Login:
Forgot password?
Register:
    • Woman with hand on her hip
      Woman with hand on her hip