Home
Fact-checked

At HomeQuestionsAnswered, we're committed to delivering accurate, trustworthy information. Our expert-authored content is rigorously fact-checked and sourced from credible authorities. Discover how we uphold the highest standards in providing you with reliable knowledge.

Learn more...

How Do I Fix a Sagging Sofa?

Amanda R. Bell
Amanda R. Bell

Even the most well-made and cared-for sofas can sag over time, making the furniture uncomfortable to sit on and oftentimes unsightly. Rather than purchasing a brand-new item, you can typically fix a sagging sofa with minimal cost and effort. To start, remove any items from the frame of your couch and take detailed measurements of the area underneath the cushions. Then, purchase a piece of plywood in the same size and place it underneath the cushions. If the sagging is caused by uneven wear on the pads, you can typically replace the foam inside the seating or add additional foam to fix the sagging.

The first step to fix a sagging sofa is to remove everything from the piece of furniture, including throws, slip covers, and pillows. Then, remove the cushions themselves, including the back cushions if they are also removable. As you are removing the cushions, check each one for unevenness, as this will help you to determine how to fix your sagging sofa later.

Plywood may be used to repair a sagging sofa.
Plywood may be used to repair a sagging sofa.

Carefully measure the area on your sofa where the seat cushions rest, making sure to measure from the front of the couch to the very back. If you have permanent cushions on the back, and there is a space beneath them for the seat cushions to slide into, measure to the back of the couch underneath the back cushions. Write the measurements down for future reference.

If a sagging sofa is caused by the cushions, replacement foam may be found at a furniture store.
If a sagging sofa is caused by the cushions, replacement foam may be found at a furniture store.

Take your couch dimensions to a local hardware store, home improvement store, or lumberyard to purchase a piece of plywood. To save yourself time, you can typically ask a store worker to cut a piece of plywood to your desired measurements rather than cutting the piece yourself at home. If you would rather do the work yourself, purchase a piece of plywood slightly larger than what you need, and cut the piece to size at home with a table saw.

Once you have the plywood in the right size, place it on the couch in the area where the seat cushions go. If the cushions themselves are in relatively good condition, place them on the piece of plywood, flipping them to the opposite side that they were before. The sturdiness of the plywood will help to prevent the cushions from drooping, and flipping the cushions will even out the wear on them.

In the event that your cushions are severely uneven, you can purchase replacement foam from a craft store, furniture store, or home improvement store to fix your sagging sofa. With the fabric removed from the cushion, measure the areas that need to be replaced, and cut pieces of foam to fit them. When you’re done, push the foam into the holes and place the fabric casing back over the cushion. If all of the foam is severely deteriorated, measure the size of the fabric casing, including width, depth, and height, and cut pieces of foam to these measurements. Discard of the old foam, and use the new pieces to fill out the fabric.

Discussion Comments

lluviaporos

@clintflint - Which is why I think it's almost always going to be better to just fix the couch you have. If you have a good one then it shouldn't be that difficult to fix and there are going to be lots of instructions available online.

People think this kind of work is going to be much more difficult than it actually is. It's very satisfying to fix something like this and make it your own.

clintflint

@MrsPramm - Honestly, once it gets to the point where it's uncomfortable to sit on without fiddling with it and if I can't afford to fix it, then I would just go to a thrift shop and get another one.

As long as you're willing to hunt for it, there are some wonderful deals to be had in thrift shops and it means that you're recycling as well.

The only thing you need to be cautious about is whether or not the new furniture is clean of all bugs. The last thing you want to do is to bring bedbugs or fleas or something into your home.

MrsPramm

If you don't think you can manage this kind of DIY but you can't afford to replace the sofa then I think a fairly good short term solution is to make an arrangement with cushions and maybe a blanket. If you put some large, flat cushions on the sagging part and then cover the whole thing with a throw, it can look almost as good as new, and hopefully will still be OK to sit on.

Post your comments
Login:
Forgot password?
Register:
    • Plywood may be used to repair a sagging sofa.
      By: artzenter
      Plywood may be used to repair a sagging sofa.
    • If a sagging sofa is caused by the cushions, replacement foam may be found at a furniture store.
      By: diego cervo
      If a sagging sofa is caused by the cushions, replacement foam may be found at a furniture store.